Console Radius AXIA

Console Radius AXIA

  • Mis à jour le : 24 août 2018
Face avant du Core
Face arrière du Core
Surface de contrôle RADIUS AXIA

Face avant du Core

La console RADIUS.


Nous consulter pour concevoir votre configuration de console, ainsi que celle des éléments périphériques

 

Technologie LIVEWIRE !

 

RADIUS SPECIFICATIONS

QOR.16 Connections

  • Microphone Inputs: 2x balanced XLR-F, with selectable Phantom power

  • Analog Inputs: 8x RJ-45, StudioHub+ standard.

  • Analog Outputs: 4x RJ-45, StudioHub+ standard.

  • AES/EBU Inputs: 1x RJ-45, StudioHub+ standard.

  • AES/EBU Outputs: 1x RJ-45, StudioHub+ standard.

  • GPIO: 4x DB-15

  • Livewire:

    • 4x 100BASE-T with PoE, RJ-45

    • 2x 100BASE-T, RJ-45

    • 2x 1000BASE-T, RJ-45

    • 2x Gigabit, SFP (Small Form Pluggable)

  • Console Frame Connections: 1x, 6-pin “latch and lock” style

  • Accessory Connections: 1x, 6-pin “latch and lock” style

 

Microphone Preamplifiers

  • Source Impedance: 150 Ohms

  • Input Impedance: 4 k Ohms minimum, balanced

  • Nominal Level Range: Adjustable, -75 dBu to -20 dBu

  • Input Headroom: >20 dB above nominal input

  • Output Level: +4 dBu, nominal

 

Analog Line Inputs

  • Input Impedance: 20 k Ohms

  • Nominal Level Range: Selectable, +4 dBu or -10dBv

  • Input Headroom: 20 dB above nominal input

 

Analog Line Outputs

  • Output Source Impedance: <50 Ohms balanced

  • Output Load Impedance: 600 Ohms, minimum

  • Nominal Output Level: +4 dBu

  • Maximum Output Level: +24 dBu

 

Digital Audio Inputs And Outputs

  • Reference Level: +4 dBu (-20 dB FSD)

  • Impedance: 110 Ohm, balanced (XLR)

  • Signal Format: AES-3 (AES/EBU)

  • AES-3 Input Compliance: 24-bit with selectable sample rate conversion, 20 kHz to 216kHz input sample rate capable.

  • AES-3 Output Compliance: 24-bit

  • Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm

  • Internal Sampling Rate: 48 kHz

  • Output Sample Rate: 48 kHz

  • A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling

  • D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling

  • Latency <3 ms, mic in to monitor out, including network and processor loop

 

Frequency Response

  • Any input to any output: +0.5 / -0.5 dB, 20 Hz to 20 kHz


Dynamic Range

  • Analog Input to Analog Output: 102 dB referenced to 0 dBFS, 105 dB “A” weighted to 0 dBFS

  • Analog Input to Digital Output: 105 dB referenced to 0 dBFS

  • Digital Input to Analog Output: 103 dB referenced to 0 dBFS, 106 dB “A” weighted

  • Digital Input to Digital Output: 125 dB

 

Equivalent Input Noise

  • Microphone Preamp: -128 dBu, 150 Ohm source, reference -50 dBu input level

     

Total Harmonic Distortion + Noise

  • Mic Pre Input to Analog Line Output: <0.005%, 1 kHz, -38 dBu input, +18 dBu output

  • Analog Input to Analog Output: <0.008%, 1 kHz, +18 dBu input, +18 dBu output

  • Digital Input to Digital Output: <0.0003%, 1 kHz, -20 dBFS

  • Digital Input to Analog Output: <0.005%, 1 kHz, -6 dBFS input, +18 dBu output

 

Crosstalk Isolation, Stereo Separation And CMRR

  • Analog Line channel to channel isolation: 90 dB isolation minimum, 20 Hz to 20 kH

  • Microphone channel to channel isolation: 80 dB isolation minimum, 20 Hz to 20 kHz

  • Analog Line Stereo separation: 85 dB isolation minimum, 20Hz to 20 kHz

  • Analog Line Input CMRR: >50 dB, 20 Hz to 20 kHz

  • Microphone Input CMRR: >50 dB, 20 Hz to 20 kHz

 

Audio Processing

  • Mic Equalizer (applicable to up to 6 faders)

  • Frequency Bands: 20Hz to 320Hz, 125Hz to 2KHz, 1.25KHz to 20KHz.

  • Cut/Boost range on each band: -25dB to +15dB.

  • Q-factor: Automatic - bandwidth varies based on amount of cut or boost.

 

Power Supply AC Input, QOR.16 with Radius Console

  • Auto-sensing supply, 90VAC to 240VAC, 50 Hz to 60 Hz, IEC receptacle, internal fuse

  • Power consumption: 100 Watts

 

Operating Temperatures

  • -10 degrees C to +40 degrees C, <90% humidity, no condensation

 

Dimensions

  • 20.5” x 19” x 4.5” (desktop to meter bridge)